Photo Album: Rushing Water Damages Boat House in Penetanguishene, Ontario
As homeowners, we do what we can to prepare for whatever nature throws at is, but sometimes there's nothing we can do except sit back and watch.
In Penetanguishene, Ontario, a family’s boathouse was affected by severe weather conditions. One winter, unusually high-water levels took their toll on the concrete boat ramp. Heavy ice and water pushed its way beneath the concrete, washing out supporting soils and rocks. As a result, several areas started to sink. This led to some serious trip hazards and damaged the ramp. The water's force and shifting concrete bent the metal boat ramp stopping the boat cradle to slide down.
The customers were very concerned that the damage to the boat ramp was too much to repair. They were always worried about someone tripping on a raised edge and were getting ready to fork out thousands of dollars to rebuild the entire thing.
To their delight, Project Manager Paul Mendell was able to provide them with an alternative repair solution. Paul explained how our PolyLevel® System could lift the sinking concrete and fill the voids caused by rushing water. The customers were still a little hesitant that all of this severe damage could be repaired in one day without using heavy equipment, but became believers after Paul showed them a demonstration.
Foreman Bill McKeown began the repair by drilling dime-sized holes in the concrete. He injected our PolyLevel® System through these ports, lifting the concrete and supporting the slabs from beneath. Once the repair was complete, Bill patched the holes with fresh concrete.
The family is in awe of the work done by Canadian Concrete Leveling. They were thrilled to watch us work and see their concrete lift in real-time, and they're looking forward to many more years of using the boathouse.
Washout Before
The customers tried using sandbags to prevent a washout, but it wasn't enough to keep back the force of the water
Washout After
Bill filled the void with high-density polyurethane, keeping water out and supporting the weight of the concrete
Garage Entry Before
When the soils eroded away and the concrete sank, it put pressure on the entire ramp and caused various sections to sink
Garage Entry After
We lifted the sinking slab back up and supported below with PolyLevel®
Ramp Before
The metal ramp itself was no longer sitting flush on the ground and couldn't even be used to pull the boat
Ramp After
As the concrete was leveled, the metal ramp frame fell back into its appropriate position
Void
Large gaps could be seen on both sides of the ramp before we filled them
Water
With water constantly smashing into the ramp it was only a matter of time before the soils washed away