This walkway running alongside the home was sinking all over the place, causing tripping hazards and water dripping into the home's foundation. The homeowners needed a solution that would not cost them a fortune, take as little time as possible, and be a permanent fix. After some research, they found Canadian Concrete Leveling to do the work. We sent our Project Manager, Joe McColl, to the home and began his quote. He devised a schematic that the whole side walkway would need PolyLevel® injections to the point the inward slanting would slant outward and have water bead off the concrete and onto the lawn rather than in the foundation.
After the quote was given out, it was time to send our Installation Specialist, Bill McKeown. He began by unloading the truck and drilling holes in the lowest points on the walkway. After the holes were placed, it was time to hammer out PolyLevel® caps in them where the machine's nozzle will connect. From there, but was time to inject the polyurethane into the voids underneath. The fascinating thing about PolyLevel® is that you can see the slab rise immediately. At first, it doesn't seem like much is happening because the voids underneath need to be filled, but the second they do, it lifts before your eyes! The homeowners were very impressed with the results and how little time it took to complete.