Canadian Concrete Leveling Before & After Photos

Keeping an establishment operating smoothly is the goal of any owner. Whether it’s a recreation centre or a library, it’s crucial to maintain a safe business.

A customer in Brampton, Ontario, operates a daycare service. The kid’s playground is separate from the building, and over the years, the walkway had settled. This created a tripping hazard right where the kids walk every day, so the situation needed to be remedied. 

The daycare owner reached out to Canadian Concrete Leveling and met with Project Manager Paul Mendell. Paul showed the customer our solutions, and he was happy to hear we had a minimally invasive method that the kids could be walking on in a matter of hours. 

Foreman Kyle McKeown drilled dime-sized holes throughout the concrete to start the repair. He used these holes to inject our high-density polyurethane, PolyLevel®, which lifts the concrete slab while compressing any soils below.

The customer is thrilled that the concrete is repaired. The work comes with a warranty for peace of mind, and the kids can safely use the walkway.

Sometimes, we repair things solely for aesthetic reasons. The way something looks is important to us, so we pay the extra money to preserve its experience.

In Toronto, Ontario, a building manager has a decorative concrete sidewalk that sits between two traditional walkways. The concrete has historical importance to the building, so the customer needed a non-invasive company to repair the section.

After discovering Canadian Concrete Leveling, he met with Project Manager Joe McColl. Joe showed him how our PolyLevel® System could lift the decorative slabs without compromising the historical integrity. The client was blown away by how our system worked and was looking forward to seeing it in action for himself.

Foreman Kyle McKeown and Installation Specialist Mark Sealy started the repair by drilling dime-sized holes in the concrete's base portion, avoiding the historical sections. The crew injected PolyLevel® through these holes, lifting the concrete slab and compressing fill materials below. Once the repair was done, Kyle and Mark patched the injection ports with fresh concrete.

The building manager and his tenants appreciate the hard work and special care from the Canadian Concrete Leveling team. The concrete is stabilized with no tripping hazards, and the historical concrete looks better than ever.

A school in Toronto, Ontario had uneven pavement in multiple spots on the walkway of the school. There were some slabs that were trip hazards and there were some slabs slanted towards a hill.  There were students slipping during the winter months off the path and down the hill. This was becoming a serious hazard. The owner of the school needed Canadian Concrete Leveling to come to fix these hazards before the school year started up again. 

Our team came in and drilled dime-sized holes in the affected areas. They then pumped PolyLevel® injection foam into the holes to fill the void under the concrete to even out the slabs and stabilize them. To be able to lean the slab away from the hill they used a jack to hold it up on one side and then continued to use the PolyLevel Foam. The Canadian Concrete Leveling team did this job before school started so that the owner did not have to worry about trip hazards and unsafe walkways for the students. 

A tripping hazard is something many people ignore until they can’t anymore. We pretend they aren’t there, but then we know something needs to be done if someone falls.

A customer in Toronto, Ontario, has a custom home that had a concrete walkway that had started to sink. They barely began to notice it when a friend of theirs took a fall. The homeowner reached out to the builder to inquire about the issue, and they promptly called Canadian Concrete Leveling to rectify the situation. 

Project Manager Paul Mendell thoroughly inspected the home’s exterior. He showed the builder how poor fill soils could lead to voids and sinking concrete, but they were excited to hear we had a non-invasive, affordable fix. 

Foreman Kyle McKeown started by drilling dime-sized holes in the concrete slabs. These holes are used as injection ports where our high-density polyurethane is installed. Once beneath the concrete, our PolyLevel® expands. This lifts the concrete and compresses the fill soils, preventing the issue from returning.

Both the builder and homeowner are thrilled about the repair. The job was done in less than a day’s work with no inconvenience to the builder and owner.

When company comes to your home, you shouldn’t have to worry whether they can make it to your front door safely. 

But for a customer in Toronto, Ontario, this is what he dealt with every time someone came to the door. A large portion of his front walkway was sinking, creating a dangerous tripping hazard. He knew something had to be done but didn’t want to spend thousands on a new walkway.

After reaching out to Canadian Concrete Leveling, he met with Project Manager Joe McColl. The customer was pleasantly surprised to hear that we had a solution for repairing the concrete without any excavating.

Joe showed him a video of our PolyLevel® System in action. The customer watched how our unique solution lifts concrete using high-density polyurethane injections. The demo piqued his curiosity. He started looking forward to the installation date so he could see the product firsthand.

Foreman Kyle McKeown started by drilling dime-sized holes in the concrete surface to use as injection ports. As the polyurethane is injected it expands, lifting the concrete and compressing fill soils below. To finish the job Kyle patched the holes with fresh concrete. 

The customer is still blown away by the simplicity and efficiency of the process. His walkway is finally safe, and he was able to repair it for a fraction of the cost he thought he’d have to endure.